Table of Contents
Advertisement
USER PROGRAMS
The user programs allow the parameters of certain functions to be set, changed, or
canceled as desired.
List of user programs
This copier has the following user programs.
Program No. Program name
1
Auto clear time
2
Preheat mode
3
Auto power shut-off
timer
4
Stream feeding mode
5
Auto power shut-off
setting
6
Border line for 2 in 1 or
4 in 1
7
Rotation copy
8
Auto paper select mode
9
Auto tray switching
16
Erase width adjustment
17
Layout in 2 in 1 copy
18
Layout in 4 in 1 copy
19
Offset of paper output
tray
Description
Sets the auto clear time. The copier returns to the initial settings when
the auto clear time elapses after the last copy is made.
Sets the time that elapses before the copier enters the preheat mode after
any operation is made. See page 52.
Sets the time that elapses before the copier enters the auto power shut-off
mode after any operation is made. See page 52.
Enables or disables the stream feeding mode. For description of the stream
feeding mode, see page 17.
Enables or disables the auto power shut-off mode. See page 52.
Enables or disables the border line which is printed in 2 in 1 or 4 in 1
copying. See page 35.
Enables or disables rotation of original images. See page 34.
Enables or disables the auto paper selection. See page 16.
Enables or disables the automatic tray switching which occurs when paper
in a tray runs out. (This switching cannot switch to the bypass tray.)
Sets the amount of the edge erase and center erase areas. See page 37.
Selects a pattern for 2 in 1 copying. See page 35.
Selects a pattern for 4 in 1 copying. See page 35.
Enables or disables the offset function of the paper output tray. See page 25.
Setting the user programs
1
Press and hold the light (
seconds until all the alarm indicators (
) blink and "– –" appears in the copy quantity display.
) key for more than 5
,
,
, and
49
Advertisement
Table of Contents
