Table of Contents
Advertisement
1
Turn the power switch off.
Open the bypass tray. Lift slightly on the side cover and
2
slide the cover out until it stops.
Gently lift and pull out the upper paper tray and take the
3
Charger
charger cleaner out by holding the tab.
cleaner
4
Set the charger cleaner onto the transfer charger and
gently slide the cleaner in the direction indicated by the
arrow two or three times.
If the white sheet metal is smudged with toner, wipe it with a soft, clean
cloth.
5
Return the charger cleaner to its original position. Close
the paper tray. Close the side cover by pressing the
handle on the cover.
Turn the power switch on.
6
USER MAINTENANCE
Slide the charger cleaner from one end to the other end
along the groove of the transfer charger. If the cleaner
is stopped on the way, smudges on copies may occur.
55
Advertisement
Table of Contents
