Table of Contents
Advertisement
USER PROGRAMS
Program name
Auto clear time
Preheat mode
Auto power shut-off timer
Stream feeding mode
Auto power shut-off setting
Border line for 2 in 1 or 4 in 1 * 0 e OFF
Rotation copy
Auto paper select mode
Auto tray switching
Erase width adjustment
Layout in 2 in 1 copy
Layout in 4 in 1 copy
Offset of paper output tray
Factory default settings are indicated with an asterisk (*).
If you select "0" (OFF) in a program, the corresponding function will be disabled.
50
2
Enter a program number using the left copy quantity
(
) key.
The selected program number will blink in the copy quantity display.
If a mistake is made in steps 2 to 4, press the CLEAR (
copier will return to step 2.
The program numbers are shown in the table on the previous page.
For example, to change the setting of the auto power shut-off timer,
enter 3.
3
Press the START (
The entered program number will be steadily lit on the left side of the
copy quantity display and the currently selected parameter number for
the program will blink on the right side.
Select the desired parameter using the right copy quantity
4
(
) key.
The entered parameter number will blink on the right side of the copy
quantity display.
The parameters are shown in the table below.
For example, to change the setting of the auto power shut-off timer to
60 min., enter 2.
Parameters
0 e OFF
1 e 30 sec.
5 e 10 sec.
0 e OFF
1 e 30 sec.
* 1 e 30 min.
2 e 60 min.
* 0 e OFF
1 e ON
0 e OFF
* 1 e ON
1 e ON
0 e OFF
* 1 e ON
0 e OFF
* 1 e ON
0 e OFF
* 1 e ON
0 e 0"
1 e 1/4"
* 1 e Pattern 1
2 e Pattern 2
* 1 e Pattern 1
2 e Pattern 2
0 e OFF
* 1 e ON
) key.
* 2 e 60 sec.
3 e 90 sec.
2 e 60 sec.
* 3 e 90 sec.
3 e 90 min.
4 e 120 min.
* 2 e 1/2"
3 e 3/4"
3 e Pattern 3
4 e Pattern 4
) key. The
4 e 120 sec.
4 e 120 sec.
5 e 240 min.
4 e 1"
Advertisement
Table of Contents
