Table of Contents
Advertisement
SORT/GROUP
This copier has two sorter modes for different copying jobs: one sorts copies
into sets matching the sequence of the originals and the second groups copies
by originals.
The sort/group feature cannot be used with the dual page copy feature.
To change the SORT/GROUP mode, press the SORT/GROUP key to select
the desired mode.
The capacity of the paper output tray is 250 sheets. When the number of
copies output reaches this limit in a sort or a group copy run, copying will
stop and the START (
Remove the copies from the paper output tray and press the START (
key to resume copying.
3
2
1
3
2
1
Offset mode
3
2
1
Non-offset mode
3
2
1
) key indicator will blink.
Sort mode
Each set of copies will be sequentially delivered to the
paper output tray.
Group mode
All copies of the same originals will be grouped in the
paper output tray.
Offset stack
If the offset stack mode is enabled using user program
No. 19, each copy will be offset by approximately 1 inch
(25 mm). When copying in the sort mode, each collated
set of copies will be stacked offset from the previous
set. When copying in the group mode, copies will be
offset and stacked in groups of multiple copies from the
same original.
If the offset stack mode is disabled, copies will not be
offset.
The offset stack mode is enabled in the factory default
setting.
)
25
Advertisement
Table of Contents
