Loading Paper In The Bypass Tray - Sharp AL-1655CS Operation Manual

LOADING PAPER

Loading paper in the bypass tray

Note
1
Open the bypass tray and extend the tray.
Note
2
Set the bypass tray paper guides to the paper width. Insert the
paper (print face down) all the way into the bypass tray.
3
Press the [TRAY SELECT] key (
22
• Paper must be fed narrow side first into the feed slot.
• Special papers such as transparency film, labels, and envelopes
must be fed one sheet at a time through the bypass tray.
• When copying onto transparency film, remove each copy promptly.
Do not let copies stack up.
To close the bypass
tray, perform step
and then step
1
in the illustration
2
and push the round
projections at the
right of the tray until
they click.
Print face
) to select the bypass tray.