Sharp AL-1655CS Operation Manual page 85

Digital multifunctional system
Hide thumbs Also See for AL-1655CS:
Table of Contents

Advertisement

4
Raise the fusing unit release lever, close the front cover and
then close the side cover by pressing the round projections
near the side cover open button. The error indicator will go out
and the ready indicator will light up.
When closing the covers, be sure to close the front cover securely and
Caution
then close the side cover. If the covers are closed in the wrong order,
the covers may be damaged.
D: Misfeed in the RSPF
An original misfeed may occur at one of three locations: if the misfed original is
visible in the document feeder tray, (A) in the document feeder tray; if the misfed
original is not visible in the document feeder tray, (B) in the exit area or (C) under the
document feeder cover. Remove the misfed original following the instructions for
each location.
(A) Open the document feeder cover and pull the original gently to the left and
out from the document feeder tray. Close the document feeder cover. Open
and close the RSPF to clear the error indicator. If the misfed original cannot
be easily removed, proceed to (C).
(B) Open the RSPF and rotate the roller to remove the misfed original from the
exit area. If the misfed original cannot be easily removed, proceed to (C).
If the original is a two-sided original, pull out the reversing tray to remove the
misfed original.
Reversing tray
After removing a misfed original from the exit area of the RSPF, be sure
Note
to insert the reversing tray into the exit area until it locks in place.
TROUBLESHOOTING AND MAINTENANCE
Document feeder cover
Roller
8
83

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Al 1655cs - b/w laser - all-in-one

Table of Contents