Niigata seiki GDCS-150DCD Instruction Manual

DIGITAL DEPTH GAUGE
Precision Measuring Tool
For Depth Measurement
Thank you for purchasing Niigata Seiki Digital Depth Gauge. This product is a digital instrument for measuring depth.
● For safe and proper use of this product, please read this instruction manual before use and follow the procedures
described. Keep this manual with the instrument for future reference.
● Keep this manual with the instrument if transferred or leased to a third party.
● For inquiries about this product, please contact dealer or Niigata Seiki at the address listed on the following page.
■
PARTS IDENTIFICATION & FUNCTION
② Probe
① Base
①
Base ···················· Reference surface placed on face of workpiece.
②
Probe ··················· Insert into groove to measure depth.
③
LCD Display ········ Displays digital measurement.
④
Lock Screw ·········· Tighten to prevent the slide and display from
moving.
⑤
[HOLD] Button ····· When pressed, "HOLD"Icon appears on
Display and measurement will be fixed.

SAFETY PRECAUTIONS

To prevent harm to yourself or others, and to prevent damage to
property, always follow the procedures marked by the following symbols.
WARNING:
Read the manual and follow the directions.
・Use of product other than as described in this manual may
cause accident.
Use only for measuring.
・Use for any purpose other than measuring may damage or
wear the instrument. Improper use may also cause accident.
Handle with Care.
・ Do not drop or subject instrument to excessive shock. Do
not place under heavy objects. Improper handling may
cause damage or poor accuracy.
・ Do not scratch instrument, for example by writing ID number.
Avoid using in high electric fields, such as near
fluorescent lights or switching power supplies.
・ Incorrect value may be displayed on LCD

PREPARATION FOR USE

● Wipe off oil, rust proofing, and dirt from measuring surfaces
and slide.
Contamination of surfaces may cause measurement error.
⑩ Scale
Indicates risk of personal injury or property damage if not followed.
Instruction Manual
③ LCD Display
⑨ [ON/OFF] Button
⑥
Output Connector ······ Connect to optional Bluetooth Box to
⑦
Battery Cover ············ Open to access battery.
⑧
[ZERO] Button ··········· When pressed, Display will read "0.00"
⑨
[ON/OFF] Button ······· For turning power ON / OFF.
⑩
Scale ························· Supports LCD Display Unit.
Please Observe
Denotes a prohibition –
You MUST NOT do
Use and store only in environment meeting the following
conditions:
●
Dry location protected from rain, water, and oils.
● Location that is not excessively hot.
● Location protected from use by children and unauthorized
people.
・
Use in places contrary to the above may cause damage to
the product resulting in accident or injury.
Do not disassemble or modify.
・
Disassembly may damage product or cause accident. For
repair, please contact distributor or place of purchase.
Do not write on instrument with electric engraver.
・
Do not engrave instrument body or jaw, such as an ID
number with engraver or electric pen.
Before using, please follow the steps below
● Allow the gauge and object to be measured time to reach the
same temperature.
A temperature difference between the object to be measured and the gauge
may cause measurement error. Allow time for the temperatures to equilibrate.
GDCS - 150DCD
Model No.
④ Lock Screw
⑤ [HOLD] Button
⑥ Output Connector
⑦Battery Cover
⑧ [ZERO] Button
send measurements to PC.
Denotes a requirement –
You MUST do