Table of Contents
Advertisement
USER PROGRAMS
The user programs allow the parameters of certain functions to be set,
changed, or canceled as desired.
Program No. Program name
1
Auto clear time
2
Preheat mode
3
Auto power shut-off
timer
5
Auto power shut-off
setting
21
Paper size setting
32
List of user programs
This copier has the following user programs.
Description
Sets the auto clear time. The copier returns to the initial settings
when the auto clear time elapses after the last copy is made.
Sets the time that elapses before the copier enters the preheat
mode after any operation is made. See page 34.
Sets the time that elapses before the copier enters the auto power
shut-off mode after any operation is made. See page 34.
Enables or disables the auto power shut-off mode. See page 34.
Sets the copy paper size in the tray.
Setting the user programs
1
Press and hold the light (
seconds until all the alarm indicators (
) blink and "– –" appears in the copy quantity display.
2
Enter a program number using the left copy quantity
(
) key.
The selected program number will blink in the copy quantity display.
If a mistake is made in steps 2 to 4, press the CLEAR (
copier will return to step 2.
The program numbers are shown in the table above.
For example, to change the setting of the auto power shut-off timer,
enter 3.
3
Press the START (
The entered program number will be steadily lit on the left side of the
copy quantity display and the currently selected parameter number for
the program will blink on the right side.
) key for more than 5
,
) key.
,
, and
) key. The
Advertisement
Table of Contents
