Part Names And Functions; Overall Layout; Paper Tray; Power Switch - Sharp AL-1600 Operation Manual

PART NAMES AND FUNCTIONS

Overall layout

q
w
e
r
t
q Platen cover
Place the original on the original table and close the
platen cover before copying starts.
w Original table
Place the document to be copied here.
e Handles
Use to move the copier.
r Power switch
Press to turn copier power on and off.
t Operation panel
All copier controls are located here for easy operation.
y Paper output tray
Finished copies are deposited in the paper output tray.
u Front cover
Open to remove misfeeds and for copier servicing.
4
o
!0
y
u
i
i Paper tray
Holds 250 sheets of copy paper.
o Side cover
Open to remove misfeeds and to service the copier.
! 0 Side cover handle
Lift and pull to open the side cover.
! 1 Bypass tray guides
Adjust to the width of the copy paper.
! 2 Bypass tray
Special papers (including transparency film) and copy
paper can be fed from the bypass tray.
! 3 Bypass tray extension
Pull out when feeding large paper such as 8-1/2" x 14"
and 11" x 17".
! 4 Charger cleaner
Use to clean the transfer charger.
e
!1
!2
!3
!4