Supplies; Types And Sizes Of Copy Paper; Supply Part Numbers - Sharp AL-1600 Operation Manual

SUPPLIES

Types and sizes of copy paper

Size
Paper tray 5-1/2" x 8-1/2"
to 11" x 17"
Bypass tray Ordinary paper:
5-1/2" x 8-1/2"
to 11" x 17"
Envelopes:
Commercial 10
(4-1/8" x 9-1/2")
International DL
(110 x 220 mm)
International C5
(162 x 229 mm)
* For paper weighing from 28 to 34 lbs., 8-1/2" x 11" is the maximum size
that can be fed through the bypass tray.
** Do not use envelopes that have metal clasps, plastic snappers, string
closures, windows, linings, self-adhesive patches or synthetic materials.
These will cause physical damage to the copier.
For best results, use only paper recommended by SHARP.
Special papers except envelopes must be fed one sheet at a time through
the bypass tray. Up to 10 envelopes can be set at one time.

Supply part numbers

When ordering supplies, please use the correct part numbers as listed below.
Be sure to use only genuine SHARP parts and supplies.
Supply list
Supply Part number
TD cartridge AL-160TD
Drum cartridge AL-160DR
*Based on copying onto letter-type paper at 6% toned area
(The life of the TD cartridge which has been included in the copier at the factory is approximately 5,000 sheets.)
40
Weight Capacity
(21 lb. bond paper)
15 lbs. to 21 lbs. 250 sheets
15 lbs. to 34 lbs.* 100 sheets
(Ordinary paper)
Usable life
Approx. 15,000 sheets*
Approx. 30,000 sheets
Special paper
Transparency film,
labels, envelopes**