Table of Contents
Advertisement
Connecting The Mains Lead
To obtain the best image quality, always use the
supplied mains lead.
First insert the mains lead into the input panel and
only then plug it into the socket.
• Never ever use a damaged mains lead!
• To ensure safe operation, only use plugs with
grounding conductor system.
A line filter and keys ensure safe operation in case
of normal network fluctuations to balance the supply
voltages. In case the network voltage is out of certain
limits, please contact your responsible sales agency.
In case the mains lead cannot be used due to the
different standards in your country, please make sure
to use a mains lead in compliance with the below
listed standards unique to countries:
Network
Input
Network key
(Lower side)
• USA
• Germany
• Canada
• Switzerland
• England
• Japan
This is not the exact list. It may be necessary to
choose a different safety standard for safety reasons.
To avoid accidents resulting from electric shock,
mains leads of all degrees should contain three cable
conductors of minimum 10A/0.75 mm
cables should be applied to the both ends of the
mains as grounding contact connection.
Socket
On
Input Panel
User's display/Infrared sensor
ENGLISH -10-
UL
VDE
CSA
SEV
BASE/BS
MITI
Off
Input Panel (lower)
. One of three
2
Advertisement
Table of Contents
