Beko Plasma TV User Manual page 24

Sound Input (R)
Sound Input (L)
Video Input
Sound Input (R)
Sound Input (L)
Video Input
From antenna input
1. Connect the RF out socket of the video device to the antenna input
located behind the television.
2. Connect the connection cable to the RF socket of the video device.
3. Store the video channel in the memory under any program.
4. Press stored video program number.
5. Press the PLAY key of the video.
6. You may connect the antenna cable to the antenna input of your
video. In that case, it is necessary for your video to be turned on so
that you can watch your TV.
Note: If you would like to use your video with the RF socket, select the
program 0.
Via the RCA or S-Video socket
You can also connect your device to your television via the S-Video
socket. To do this;
For this purpose; connect the S-Video cable to the S-Video socket and
the audio cables to the audio sockets.
AV-2
AV-1
Insert the 21 pin
SCART socket in the 21
pin SCART socket on
the TV.
ENGLISH -26-
Video
Y
Audio In
Pb
L
L
ANT-IN
DVI-D
S-VHS
R
AV-3 AV-Out YPbPr
Antenna
PC-DVI
PC-IN
Audio In
HDMI