Beko Plasma TV User Manual page 30

Of course, the complete screens may be sent
to the manufacturer for repair. For this, please
include the information below about your screen:
1. Description of the Fault
Describe the exact symptoms in detail as much
as possible. If the fault occurs from time to time,
please include this in your description.
2. Certain expressions
Please specify in the return forwarding if your
device was modified or adapted previously. For
the previous adaptation, if you do not want this
adaptation to be modified, please specify.
3. Invoicing
Please inform about the invoice type you want;
merely, specify if you want an estimation before
undertaking any financial responsibility before
your device is repaired. In case no detail is
specified for this purpose, the repairs will be
performed according to the standard procedures.
Cleaning the Screen and Its Case
The dust accumulated on the screen and other
filth affect image quality and be cleaned from
time to time.
ATTENTION
Remove the mains lead before cleaning.
Cleaning of the plasma screen may be divided
into different areas.
1. Screen Surface
Wet the cloth with a glass cleaner not harmful
to the environment (do not dip into water). It
contains active substance (up to 98%) surfactant
materials soluble in water. Glass cleaner cleans
fingerprints, grease, dust and nicotine
accumulation away. To prevent scratches, clean
the screen in circular movements. Dry the screen
with a second clean cloth.
2. Surface of the Case
It is recommended to clean the dust and filth
from the case with a feather dust cleaner
beforehand. Feather dust cleaner should be
made of non-conductive material such a plastic
or wood. Wet the cloth with a glass cleaner not
harmful to environment and/or antistatic plastic
cleaner (do not dip into the water). It cleans the
surface and also protect against electrostatic
charge, which is one of the main reasons of dust
accumulation on the screen. Pursuant to the EU
recommendations, this cleaner contains surface
active material less than 5%, alcohol and little
amount of smell. Pursuant to GelStoffV
(regulations of dangerous substances), these
cleaning agents are named as flammable
material; however, according to VbF (regulations
of flammable fluids), they are not flammable.
Return Statement
The supplier firm is aware of the gradually
increasing importance of protecting the
environment and preventing waste. Even at the
beginning of product development, great
importance is attached to the effective use of
reusable components and the product's easy
decomposition at the end of its service life. The
modular design and the materials used in the
colour plasma screen makes it possible to
decompose the fine components, which is
deemed to be precondition for recycling.
We warrant that we will take return of the plasma
screen at the end of the product's service life.
We well provide sufficient recycling of all the
components or transfer the components to a
waste treatment facility for the protection of our
environment. For detailed information, please
contact our service department.
ENGLISH -32-