Table of Contents
Advertisement
Performing the initial power-on settings
TV controls:
Temporary On-Off (STAND-BY)
When you press the red ( ) stand-by
button (Temporary power on-off
function) located on the upper right
hand side of your remote control of your
television when it is switched on; the
PR+
sound and the picture will go off. In that
PR-
case, the power indicator of your
television will flash in the colour red.
To switch your television back on, either press
the same button, any of the digital buttons or the
(
)/(
) buttons.
Caution!
If you are not going to use your television for a
long period of time, make sure to switch it off
from the main power button.
When you first turn on your television, select the
language and the country you wish from the
displayed menu via the buttons ( / ) and (
then press the button (
tab. The automatic channel search will start via
the ATS system and the program table will be
displayed on the screen following the search. If
you would like to exit such menus without any
operation, press the button ( ).
Program selection
You may enter whichever program
PR+
number you would like by pressing the
buttons (
PR-
television and your remote control. To
select programs higher than 9, you may
use the Numerical buttons. You may
enter the number of the program you
want to select with numerical buttons.
For example, to switch to the program
number 12, press relatively the buttons
number 1 and 2 found on your remote
control.
01
09
TRT-1
02
10
TRT-1
03
11
TRT-1
04
TRT-1
12
05
SHOW
13
06
14
07
15
08
16
skip
move
/
) in the auto-program
)/(
) located on your
17
18
19
20
21
22
23
24
name
delete
Temporary sound mute (MUTE)
To temporarily mute the sound of your
television, press the ( ) button. Then
the ( ) on screen display will appear
on screen as an indication of the
application. When you press the same
button for the second time, the sound will be on
again. When you press the button ( ) in the
Mute position, the sound is turned down, yet you
do not abort the Mute position, and when you
press the button ( ), the sound level is increased
and the Mute position is aborted.
Final Program Selection Button (Swap)
If you would like to return to the final
program you watch by pressing a single
button while in any program, press the
button ( ). When you press the button
( ) while in any program or AV, it directly
),
switches to the program you selected. If you
press the same button again, it switches to the
program you last viewed.
PR 01
ENGLISH -14-
PR 11
PR 01
Advertisement
Table of Contents
