3. Press the selection arrow corresponding to "ENERGY SAV-
ING" to disable (
) or enable (
4. Press the selection arrow corresponding to "
back to the homepage.
The corresponding symbol appears on the display alongside the
time to indicate that the function has been enabled.
8.10 Coffee temperature
To modify the temperature of the water used to make the coffee,
proceed as follows:
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " COFFEE TEMPER-
ATURE" appears on the display;
3. Press the selection arrow corresponding to " COFFEE TEM-
PERATURE". The selectable values appear on the display (B1)
(the current value is underlined);
4. Press the selection arrow corresponding to the value you
want to set (LOW, MEDIUM, HIGH, MAXIMUM);
5. Press the selection arrow corresponding to "
to go back to the homepage.
Please note!
A different temperature can be set for each profile (see sec-
tion"14. Memorising your personal profile").
8.11 Water hardness
For instructions on setting water hardness, see section "17. Set-
ting water hardness".
8.12 Selecting the language
To modify the language of the display (B1), proceed as follows:
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to
GUAGE" appears on the display;
3. Press the selection arrow corresponding to
LANGUAGE";
4. Press the selection arrow corresponding to the language
required (press the selection arrow corresponding to
"NEXT>" to display all the languages available);
5. Press the selection arrow corresponding to "
to go back to the homepage.
8.13 Beep
This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. To
disable or enable the beep, proceed as follows:
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
) the function.
ESC" to go
ESC" twice
"
NEXT>" until "
SET LAN-
"
ESC" twice
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " BEEP" appears on
the display;
3. Press the selection arrow corresponding to "BEEP" to disa-
ble (
) or enable (
4. Press the selection arrow corresponding to "
back to the homepage.
8.14 Cup light
This function enables or disables the cup lighting.
"
The lights come on each time a coffee or milk-based beverage is
made and during each rinsing cycle.
To disable or enable this function, proceed as follows:
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until "CUP LIGHTING"
appears on the display;
3. Press the selection arrow corresponding to "cup lighting"
to DISABLE (
4. Press the selection arrow corresponding to "
back to the homepage.
8.15 Bluetooth
This function enables or disables the protection PIN to connect
to the appliance from a device.
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " BLUETOOTH"
appears on the display;
3. Press the selection arrow corresponding to " BLUETOOTH".
The serial number of the machine (19 digits) and a 4 digit
"
number (PIN) appear on the display (B1);
4. Press the selection arrow to disable (
) the request for the PIN when you connect via the APP;
5. Press the selection arrow corresponding to "
to go back to the homepage.
SET
The preset PIN is "0000". You are recommended to customise the
PIN directly from the APP.
Please note!
The serial number of the appliance, visible in the "Bluetooth"
function, enables it to be identified unambiguously when an
association is created with the APP.
8.16 Default values
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
"
To reset the default values, proceed as follows:
13
) the function;
) or enable (
) the function;
) or enable (
ESC" to go
"
ESC" to go
"
ESC" twice