DeLonghi ECAM65*.55 series Instructions For Use Manual page 28

DISPLAYED MESSAGE
WATER CIRCUIT EMPTY
PRESS OK TO START
OK
PRESS OK TO CLEAN OR TURN
DIAL
OK
TURN MILK FROTH
ADJUSTMENT DIAL
TO CLEAN POSITION
CLEAN
ESC
TURN FROTH ADJUSTMENT
DIAL
POSSIBLE CAUSE
The water circuit is empty
The milk container has been inserted with
the froth adjustment dial (D1) in the "CLEAN"
position.
Milk has been delivered recently and the tubes
inside the milk container (D) must be cleaned.
The milk container has been inserted with
the froth adjustment dial (D1) in the "CLEAN"
position.
27
REMEDY
Press " OK" to deliver water from the spout
(C6) until it flows out normally.
If the problem persists, make sure the water
tank (A16) is fully inserted.
To proceed with the CLEAN function press "
OK", or turn the froth adjustment dial to one of
the milk positions.
Turn the froth adjustment dial (D1) to CLEAN
(fig. 20).
Turn the dial to the required froth position.