Execute Commands; Execute Commands - Object-Oriented - Siemens FT2080 Operation Manual

4.9 Execute commands

4.9.1
Building Technologies
Fire Safety
Commands can be executed in two ways:
Object-oriented command execution
l
– Here, first select the target object and then the command on which the
target object is to be executed.
– Navigation in the 'Topology' and the 'Element search' is object-oriented.
Function-oriented command execution
l
– Here, first select a command and then the target object on which the
command is to be executed.
– The use of the 'Functions' menu is function-oriented.
In the fire detection system, these two methods of entering commands are
combined in the interest of a better overview during the selection. It is possible to
switch between the two methods during the command entry sequence.
Exit the navigation or command execution
Press the darkened area outside the currently opened dialog window.
l
a The navigation or command execution is canceled.
a The start screen is displayed.
Execute commands – object-oriented
Commands are executed by pressing the touch-sensitive area of the corresponding
button. The touch-sensitive areas are depicted in the following example as well as
in the instructions given.
'OFF' command: Object-oriented execution
1. Press 'Lower level' in the 'Detection tree' list entry.
a All 'Areas' in the 'Detection tree' are displayed.
2. Press 'Lower level' in an 'Area' list entry.
Fundamentals of operation
Execute commands
A6V10380629_en--_a
2015-09-10
4
89