Table of Contents
Advertisement
Note
If you cannot operate your Component after performing
the AUTO SEARCH function, perform the Learning
function. For details, see "Programming other remote
control signals" (page 29.)
Deleting a Component
POWER
LIGHT
INPUT
ALL OFF
TV
MOVIE
MUSIC
C1
C2
C3
UTILITY
OTHER
You can delete a Component.
Tips
• If
(
) appears in the lowest line of the display,
the display can be changed to the previous (next) page
by pressing each Label button.
• You can select a preset Component by pressing its
Function select button.
1
Press the UTILITY button repeatedly
until "UTILITY-3" appears on the display
title.
"UTILITY-3" appears as the display title.
2
Press the Label button "PRESET."
"PRESET" appears as the display title, and
preset Components appear on the display.
2
4
1
3
Select the Component name you want the
Remote Commander to delete by pressing
the Label button, or pressing the Function
select button.
The selected Component's name appears as the
display title.
4
Press the Label button "DELETE."
"DELETE OK?" appears as the display title,
and asking you to confirm deleting.
5
Press the Label button "YES."
A beep sounds, and "PRESET" appears as the
display title, and preset Components appear on
the display.
6
To delete other A/V Components, repeat
steps 3 to 5.
28
Advertisement
Table of Contents
