Turning On The Tv And Setting The Channels; Performing Digital Tunings - Beko 15LB250MID Operating Instructions Manual

6.2-Turning on the TV and
Setting the Channels
LANGUAGE menu displays when you turn
on your television for the first time. Using
the Right/Left movement buttons, select
the desired language. Then, the COUNTRY
SELECTION menu will be displayed.
Select the country by using Up/Down,
Left/Rightmovement buttons and press
OK button to start the auto programming.
Channel Searchmenu will be displayed and
digital channels are scanned and stored in the
memory. After completion of the searching
process Channel Search Results menu
will be displayed. Number of TV and Radio
channels already detected and stored in the
memory at the end of the search process will
be displayed in this menu. Finish the Digital
channel searching process by pressing the
OK button.
PRESS OK KEY TO START ANALOGUE
SEARCH PRESS MENU KEY TO EXIT
message will be displayed. You can make
Analogue channel tuning with OK button
or finish the searching process by pressing the
MENU button.

6.3-Performing Digital Tunings

You can either tune the Digital programs
automatically or manually and store them in
your television.
6.3.1-Automatic Tuning of Channels
and Storing in the Memory
Press AV button on your remote
control, select DIGITAL tab from the
SOURCE menu by using Up/Down
movement buttons and confirm by
pressing the OK button. Your TV will
switch to Digital mode. Press MENU
button, MAIN MENU will be displayed.
Select SETUP tab with Down
movement button and confirm with
the OK button. SETUP menu will be
displayed.
SETUP
AUTO TUNING
MANUAL TUNING
FIRST TIME INSTALLATION
SELECT
BACK
MENU
11
Select AUTO TUNING tab and confirm
by pressing the OK button. COUNTRY
SELECTION menu will be displayed.
COUNTRY SELLECTION
BELGIUM
CZECH REP
DANMARK
DEUTSCHLAND
ELLADA
ESPANA
FRANCE
HUNGARY
IRELANDA
ITALIA
START AUTOPROGRAMMING
Select the country by using Up/Down,
Left/Rightmovement buttons and press
OK button to start the auto programming.
Channel Searchmenu will be displayed and
digital channels are scanned and stored in
the memory.
Note: You can also assess AUTO TUNING
menu from the Complete Channel Search
tab in the System Menu under Digital
Features menu.
6.3.2-Manual tuning of channels and
storing in the memory
In digital mode: Press MENU button,
MAIN MENU will be displayed.
Select SETUP tab with Down
movement button and confirm with
the OK button. SETUP menu will be
displayed. Select MANUAL TUNING
tab and confirm by pressing the OK
button. Manual Search Parameters
menu will be displayed.
Manual Search Parameters
Channel
Frequency
Update of Channel List
Change
NETHERLANDS
NORGE
ÖSTERREICH
POLSKA
PORTUGAL
SCHWEIZ
SUOMI
SVERIGE
TÜRKİYE
U.K.
..........................
MENU
BACK
21
474000
Add channels
Start Back