Mechanical Drawings Mechanical Drawings Front and Side Views 338.1 mm (13.31") 35.7 mm (1.40") 295.7 mm 188 mm (11.64") (7.4") 249 mm (9.8") 7.1 mm (0.28") Bottom View 280.9 mm (11.06") 49.8 mm 35.7 mm (1.96") (1.40") 7.1 mm (0.28") 338.1 mm (13.31") ML12D User Manual, January 2015 4 ...
4� Ensure that the ambient humidity of the air around the unit does not exceed the specifications of the unit. f The maximum rated humidity for the HIS-ML12 is 90% non-condensing� ML12D User Manual, January 2015 5...
Installation Instructions Step 2: Bench-test Configuration Make sure everything works before installing into the production environment� TIP! If using a KVM extender, please refer to the installation instructions included with the KVM extender module� It is particularly important to bench-test the full configuration prior to final installation� This will help to identify and troubleshoot any system issues while configuration changes may still be easily made� Install Cable Connections All monitors are shipped with a 6 ft� (1�8 m) VGA video cable, 6 ft� (1�8 m) power cable, and power supply, unless longer cables were ordered in their place�...
Connect the other end to the video output port on the host computer� Power Connection The HIS-ML12 is powered by 12 VDC, 2�5 A (100 to 240 VAC, 60/50 Hz with external power adapter)� Connect the external power adapter barrel connector to the DC power input on the rear of the monitor�...
Page 8
Installation Instructions If the CD does not automatically run, browse the contents of the CD and open the READ�ME�FIRST�htm file in a web browser� Select the appropriate driver� 2� Click to "Run" the software when prompted� Follow on-screen instructions to download and execute the touch screen driver installation�...
Once you have completed the full bench-test configuration and confirmed that all components are working properly, you are ready to install the monitor into its panel cutout� WARNING! Hope Industrial Systems will not assume liability for damage to internal electronics due to improper installation� Contact Hope Industrial Systems if you need additional assistance� 1� Refer to the drawing below for the cutout dimensions for the HIS-ML12� 308 mm (12.12") 263 mm (10.35") 2�...
Page 10
Installation Instructions 3� Cut a rectangular hole in the panel� f Cutout Dimensions (W x H) for the HIS-ML12: 308 mm x 263 mm (12�12" x 10�35"); ± 0�5 mm (0�020") 4� Clean and deburr the panel hole� 5� Separate the rear collar from the monitor by removing the 8 nuts� 6� Refer to the enclosure mounting diagram below�...
Video Settings Video Settings Setting the Timing Mode Setting the timing mode of your computer graphics adapter (or other video source) is important for maximizing the quality of the screen image and for minimizing eye strain� The timing mode consists of the resolution (e�g� 800 x 600) and refresh rate (or vertical frequency; e�g� 60 Hz)� After setting the timing mode, use the On-Screen Display (OSD) controls to adjust the screen image�...
Video Settings Control Panel Buttons Use the control panel buttons located on the back of the monitor to display and adjust various settings on the On-Screen Display (OSD) menu� CONTROL PANEL BUTTONS 1� To display the Main Menu, press the button� NOTE: All OSD menus and adjustments screens disappear automatically after 10 seconds�...
Page 13
Video Settings Button Control Functions Left / Down When the OSD menu IS displayed: • Scrolls left and adjusts items in the menu down� Right / Up When the OSD menu IS displayed: • Scrolls right and adjusts items in the menu up� Menu When the OSD menu IS NOT displayed: •...
Video Settings On-Screen Display (OSD) Menus To open the OSD menu, press the button� Menu Description Brightness Adjusts the Brightness� 101 scales of brightness are available (0 to 100)� Contrast Adjusts the Contrast� 101 scales of contrast are available (0 to 100)� H� Position (Horizontal Moves the screen image left or right�...
Page 15
Video Settings Menu Description Language Allows the user to choose the language used in the OSD menu� Five language options are available: English, German, French, Spanish, and Italian� Color Temperature Three different modes are available: • User – allows the user to make individual adjustments for Red (User R), Green (User G), and Blue (User B) •...
Cleaning Instructions Cleaning Instructions CAUTION! DO NOT USE ABRASIVE MATERIALS, SUCH AS PAPER TOWELS OR DIRTY SHOP RAGS, ON THE DISPLAY AS IT WILL SCRATCH THE PROTECTIVE COATING� ALWAYS USE A SOFT CLOTH, PREFERABLY MADE OF COTTON� All displays may be cleaned using any standard glass cleaner as long as there is no abrasive or oily content� Vinegar or ammonia will not hurt the screen� The anti-reflective coatings on glass window-equipped displays are physically part of the surface of the glass and resist degradation to the Military Specifications�...
Troubleshooting Troubleshooting Video Troubleshooting IMPORTANT! If using a KVM extender, first try to resolve any problems using the solutions listed below� If the problem still exists, try bypassing the KVM extender� If this fixes the problem and allows the monitor to work properly, then the KVM extender is the source of the problem� Please refer to the troubleshooting section of the KVM extender manual or contact Hope Industrial Systems for additional assistance� Symptom Causes Solutions No image on Monitor is not powered on� • Press the Power button on the the screen and monitor and make sure the Power control's Power Indicator light is lit green� Indicator light is • Check power connections at the not lit monitor and power source�...
Page 18
Troubleshooting Symptom Causes Solutions No image on Video cable is not plugged in Check the video cable connection at the the screen and correctly� monitor, PC, and/or KVM extender� control's Power PC is in Power Saving mode� Power Saving mode can usually be Indicator light is exited by moving the mouse or pressing lit orange a key on the keyboard�...
Troubleshooting Touch Screen Troubleshooting Applies to touch screen monitors only� To be sure that you have the most current driver, please check the following Internet address: http://www�HopeIndustrial�com/Touchscreen_Drivers�htm Symptom Causes Solutions No response Touch screen driver has not Download and install the latest driver when touching ...
Specifications Specifications Display Type Thin-film transistor (TFT) Active Matrix Liquid Crystal Size 12�1" diagonal Image Size (W x H) 246 mm x 184�5 mm (9�7" x 7�3") Native Resolution SVGA (800 x 600, 4:3 aspect ratio) Minimum Resolution VGA (640 x 350) Pixel Pitch 0�308 mm x 0�308 mm Number of Colors 262,144 Brightness (white) ...
Specifications Electrical Power Adapter Input 100 to 240 VAC, 1�2 A, 60/50 Hz Power Adapter Output 12 VDC Monitor Input 12 VDC, 2�5 A Power Consumption ~ 20 W Power Consumption DPMS, < 5 W (Standby mode) Environmental Operating Temperature 0° to 50°C (32° to 122°F) Storage Temperature -20° to 60°C (-4° to 140°F) Humidity 20% to 90% non-condensing Operating Shock...
Specifications Physical Enclosure Type Panel mount; rear collar compresses gasket against panel (5/16" maximum panel thickness); held by 8 M5 studs Panel Rating (with proper Built to IP65/IP66 standards; NEMA/UL Type 12/4/4X installation) Depth Behind Panel 40�6 mm (1�6") maximum; 63�5 mm (2�5") at connectors Front Bezel Outside 338�1 mm x 295�7 mm x 7�1 mm (13�31"...
Warranty Statement Warranty Statement Who is Covered? This warranty covers the purchaser of this product only and is not transferable without our written consent� What Does This Warranty Cover and What is the Period of Coverage? We warrant this product to be free from defects in material and workmanship, subject to the conditions set forth below�...
Page 24
Hope Industrial Systems, Inc. US / International 1325 Northmeadow Parkway Suite 100 Roswell, GA 30076 United States Toll Free: (877) 762-9790 International: +1 (678) 762-9790 Fax: +1 (678) 762-9789 Sales and Customer Service: sales@HopeIndustrial.com Support and Returns: support@HopeIndustrial.com Accounting Department: accounting@HopeIndustrial.com www.HopeIndustrial.com United Kingdom...