Installation And Electrical Connection; Requirements For The Electrician - ABB 83342-500 Operating Instructions Manual

Operating Instructions
®
ABB Welcome
13

Installation and electrical connection

Warning
Electric voltage!
Direct or indirect contact with live components can cause dangerous currents to flow through the body, which
may result in electric shock, burns or even death.
-
Always disconnect the main power supply prior to installation and/or disassembly.
-
Work on the 110 V - 240 V supply system must be performed only by qualified personnel.
13.1

Requirements for the electrician

Warning
Electric voltage!
Install the device only if you have the necessary qualifications.
-
Incorrect installation endangers your life and that of the user of the electrical system.
-
Incorrect installation can cause serious damage to property, e.g., due to fire.
The minimum necessary expert knowledge and requirements for the installation are as follows:
-
Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect from power;
2. Secure against being re-connected.
3. Ensure there is no voltage.
4. Connect to earth and short-circuit.
5. Cover or barricade adjacent live parts.
-
Wear suitable personal protective clothing.
-
Use only suitable tools and measuring devices.
-
Check the supply network type (TN system, IT system, TT system) to secure the following
power supply conditions (classic connection to ground, protective earthing, necessary
additional measures, etc.).
Warning
Electric voltage!
Risk of death and fire due to electrical voltage of 100 V - 240 V.
– Work on the 100 V – 240 V supply system may only be performed by authorized electricians.
– Disconnect the main power supply prior to installation and/or disassembly.
13.2 Mounting
The IP-Gateway must only be installed on mounting rails according to DIN EN 500022. The IP-Gateway is latched
onto the mounting rail.
— 45 —