ABB-Welcome Technical data Pos : 13 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Übersc hriften (--> Fü r alle D okumente <--)/1. Ebene/S - T /Technisc he Daten @ 11\mod_1279185386320_15.doc x @ 83019 @ 1 @ 1 Technical data Pos : 14 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Technisc he Daten/Di mmer/Technisc he Daten - 6591 U- 101 @ 23\mod_1333089085280_15.doc x @ 207039 @ @ 1...
The 83350 Telephone gateway is part of the ABB-Welcome door communication system and operates exclusively with components from this system. The product serves for connecting a telephone system to the ABB-Welcome system, so that the connected telephones will act as audio Indoor stations.
Pos : 31 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Ansc hluss/Di mmer /Ansc hlus s - 6591 U-101 @ 23\mod_1333093920008_15.doc x @ 207132 @ @ 1 Fig. 1 Function Terminals for ABB-Welcome system Terminals (Telephoneline clamps) for Private Branch Exchange (PBX) in telephone system Note The Telephone gateway is always set as master.
Function Operation status of connection to PBX Connected to PBX (idle or ongoing call) : a. Ringing Operation status of ABB-Welcome bus : Ready for operation. Bus voltage is applied. : a. Receiving data : Reset to factory defaults ongoing USB port for software update (can be done only in the factory).
Pos : 41 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Inbetri ebnahme/Di mmer/Inbetriebnahme - 6591 U-101 @ 19\mod_1311948781023_15.doc x @ 108300 @ 222 @ 1 The following components are required to operate the Telephone gateway: - ABB-Welcome door communication system including the System controller and at least one Outdoor station. - A PBX with analogue input - At least one telephone for configuring via DTMF For the initial startup of the Telephone gateway, a few basic settings need to be made.
Page 10
ABB-Welcome Commissioning Set New Indoor station [*] Indoor station Number [*] [7] [*] PINs New Indoor station PIN [*] New Indoor station PIN [#] Set Telephone gateway [7] [4] [3] [*] Identifier [*] Identifier [#] Identifier should be an integer from 1 to Identifier for 99, and has to be unique.
ABB-Welcome Operation Pos : 43 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Übersc hriften (--> Fü r alle D okumente <--)/1. Ebene/A - F /Bedienung @ 11\mod_1279185541649_15.doc x @ 83043 @ 1 @ 1 Operation Pos : 44 /Busc h-J aeg er (Neustr uktur)/Modul- Struktur /Online-Dokumentati on/Bedienung/Di mmer/Bedi enung - 6591 U-101 @ 23\mod_1333091293158_15.doc x @ 207069 @ @ 1 After Programming, users can use a telephone to call the Telephone gateway.
Page 12
ABB-Welcome Operation [*] Indoor station number [*] Control Switch actuator when Indoor station PIN [*] [5] [1] [#] to [5] [199] Indoor station PIN is must Activate Default phone [*] Indoor station number [*] [6] [0] [#] number Activate Default phone...
ABB-Welcome Tones for indication Tones for indication Function Tones Explanation Confirmation of a successfull Successfull operation Notification of a not successfull Not successful operation Doorcall waiting (only when direct accept feature is deactivated, Door Call (repeating) because further Indoor stations in...
ABB-Welcome Appendix Appendix 10.1 Frequently-used commisioning Use case: One apartment with one telephone + one Telephone gateway. User uses phone to call Telephone gateway firstly, then Function Command Example or explanation Step 1 Enter Admin PIN [*] [*] [*] + Admin PIN + [#]...
Page 15
We reserve the right to at all times make technical changes as well as changes in the contents of this document without prior notice. The detailed specifications agreed to at the time of ordering apply to all orders. ABB accepts no responsibility for possible errors or incompleteness in this document.