ABB 83342-500 Operating Instructions Manual page 37

Operating Instructions
®
ABB Welcome
4. Select a Telephone Gateway device in the list, and input the password. Default password: 1234.
Fig. 26
5. If the password is correct, it will display as follows:
Fig. 27
No. Function
1 Click "Edit" to change the password (4 digits).
2 Installer can select "Enable" or "Disable" for direct acceptance from the list.
3 Installer can enable or disable "Call Divert for All Indoor Stations."
4 This admin password is used when user logs in at TGW.
5 Installer can edit default phone number directly with maximum 16 digits.
6 Installer can enable or disable "Indoor Station PIN Active for all Indoor Stations."
7 All indoor station numbers are listed from 1 to 250.
8 Installer can select "Yes" or "No" from "Existing" according to actual installation.
a.
b.
9 Installer can select "Enable" or "Disable" from "Indoor Station PIN Active."
10 Installer can select "Default," "Primary" or "Secondary" from "Call Divert Number Active."
11 Installer can edit primary and secondary phone numbers, with maximum 16 digits.
12 Installer can edit indoor station (4 digits).
13 Click "Export," and all current parameters of the telephone gateway are exported to *.txt. If the installer
made a modification but didn't click "Send", before clicking "Export," the original parameters are exported.
If "Yes" is selected, all parameters to the right can be edited.
If "No" is selected, all parameters to the right are deleted, which means this indoor station is deleted
from the indoor station address.
— 37 —