External Illumination Parameters - Honeywell Vuquest 3330 User Manual

External Illumination Parameters

Absolute Maximum
Maximum voltage on output pin with scanner powered
down.
Maximum current driven into pin from external source.
Parameter Values
Output Low Voltage
Iout = 500uA
Output Low Voltage
Iout = 1mA
Output Low Voltage
Iout = 4mA
Output Low Voltage
Iout = 6mA
Output High Voltage
Iout = -500uA
Output High Voltage
Iout = -1mA
Output High Voltage
Iout = -4mA
Output High Voltage
Iout = -6mA
Vuquest 3320g User Guide
High Value: 6 Volts
High Value: 5mA
High Value: 0.6 Volts
High Value: 0.7 Volts
High Value: 1.0 Volts
High Value: 1.2 Volts
Low Value: 3.6 Volts
Low Value: 3.5 Volts
Low Value: 3.3 Volts
Low Value: 3.1 Volts
External Illumination Control
This allows a pull-up to be connected to this line
provided it does not exceed the current on the
next line of this table while operating.
Maximum current limited by series resistor
dissipation.
Internal one-hundred ohm series resistor drop
included.
89