2, Antenna; 3, External Spk-Mic Jack; 4, Belt Clip - HYT PRV599A Owner's Manual

PRELIMINARY

2, ANTENNA

Position the antenna base on the radio connector and screw the antenna in clockwise until clicks
in place.

3, EXTERNAL SPK-MIC JACK

Plug speaker-microphone pins into the SP/MIC jacks. Fix the external speaker-microphone with
the retainer by using supplied screws(3mm×6mm ). If the external speaker-microphone is not
used, cover the SP/MIC jacks with jack caps by using supplied screws(3mm×6mm).

4, BELT CLIP

If it is necessary, it can be mounted to the belt with 2 pcs screws of 3mm×8mm .