Sony PCWA-C150S Operating Instructions Manual page 36

4
5
6
36
Enter an alphanumeric name for the profile in the Profile
Name field (symbols are also allowed). Verify that Access
Point is selected in the list at right, and click Next.
The window shown below appears.
In the Network Name field, enter the same Network Name
as set at the Access Point. You can also click Scan to
search for Access Points in the communication range.
Note
The Network Name is case sensitive. Be sure to use the same upper case/lower case
spelling as at the Access Point.
z Tip
• If you leave the Network Name field blank, the computer will attempt to connect
to an arbitrary Access Point within range. If you enter "ANY" (all in upper case)
in the Network Name field, the computer will attempt to connect to all Access
Points within range.
• If the Scan button is grayed out, Access Point search cannot be carried out. Enter
the Network Name set at the Access Point.
From the Network Name Scan <??> dialog box, select the
Access Point to which you want to connect, and Click OK.