Sony PCWA-C150S Operating Instructions Manual page 38

9
38
1. Place a check mark in Enable Data Security.
2. Select the input method for the key (password for connecting
to an Access Point with Data Security enabled): Use
Alphanumeric Characters (0 - 9, a - z, A - Z) or Use
Hexadecimal (0 - 9, a - f, A - F).
Note
If the Access Point still uses the factory default key, it is strongly recommended
that you change it after having checked that communication can be established.
After changing the settings of the Access Point, use Client Manager again to
change the settings for the Wireless LAN PC Card accordingly. For details about
changing the settings of the Access Point, see the documentationof your Access
Point.
3. In the field Key 1, Key 2, Key 3, or Key 4, input the encryption
key set at the Access Point, and select the field where you
have input the key from the Data Security Encryption <??>
drop-down list.
z Tip
Usually, Key 1 will be used. The PCWA-A200 also uses Key 1.
Click Next.
The window shown below appears.