Sony PCWA-C150S Operating Instructions Manual page 44

• Check the Network Name (also called SSID) and the Data
Security (also called WEP or Encryption) settings at the Access
Point. For details about these settings, consult your network
administrator. When using the Access Point in the factory default
condition, the settings are listed in the documentation of the
Access Point.
Note
Before configuring the Wireless LAN PC Card, perform the following steps to confirm
that the Use Windows to configure my wireless network settings check box is selected.
This option is selected as the default setting.
To confirm that the Use Windows to configure my wireless
network settings check box is selected:
1.From the Start menu, select Control Panel, then double-click
2.Right-click Wireless Network Connection, and click Properties.
3.Click the Wireless Network tab.
4.Confirm that the Use Windows to configure my wireless network
1
2
44
Network Connections.
settings check box is selected. If it is not selected, select the
checkbox.
Right-click "Wireless Network Connection" in the notification
area of the taskbar. In the shortcut menu that appears,
select View Available Wireless Networks.
The Connect to Wireless Network dialog box appears.
Click the Access Point to which you want to connect.