Sennheiser SKM 2000 Instruction Manual page 14

Press the multi-function switch.
The transmission frequency is displayed but the radio
microphone does not transmit an RF signal. The transmission
icon
activated on both radio microphone and receiver,
appears on the receiver's display panel.
543.200
**2000**
P
AF
Use this function to save battery power or to prepare a radio
microphone for use during live operation without causing
interference to existing transmission links.
To activate the RF
Briefly press the
ON/OFF
"RF Mute
Press the multi-function switch.
The transmission icon
microphone transmits an RF signal.
To switch the radio microphone off:
If necessary, deactivate the lock mode (see page 14).
Keep the
ON/OFF
the display panel. The red
panel turns off.
When in the operating menu, pressing the
cancel your entry (ESC function) and return you to the current
standard display.
is not displayed. When the pilot tone function is
MHz
MUTE
signal:
ON/OFF
Off" appears on the display panel.
ON/OFF button
Using the radio microphone
button.
is displayed again. The radio
pressed until "OFF" appears on
ON LED goes off and the display
ON/OFF
"RF Mute"
button will
13