Using The Radio Microphone; Switching The Radio Microphone On/Off - Sennheiser SKM 2000 Instruction Manual

Using the radio microphone

Using the radio microphone
To establish a transmission link, proceed as follows:
1. Switch the receiver on (see the instruction manual of the receiver).
2. Switch the radio microphone on (see next section).
The transmission link is established and the display backlighting of the
receiver changes from red to orange.
It is vital to observe the notes on frequency selection on page 27.
If you cannot establish a transmission link between transmitter and
receiver, read the chapter "Synchronizing the radio microphone with a
receiver" on page 27.

Switching the radio microphone on/off

To switch the radio microphone
Briefly press the
ON/OFF
The red
display appears on the display panel. The transmission
icon
signal.
To switch the radio microphone
switch-on (offline operation):
Keep the
ON/OFF
appears on the display panel.
12
on (online operation):
ON/OFF
ON LED lights up. The "Frequency/Name" standard
is displayed. The radio microphone transmits an RF
on
ON/OFF button
button .
and to deactivate the RF signal on
pressed until "RF Mute On?"