Hood Stop Adjustments - Lang CSE12-208VCD Installation And Operation Instructions Manual

HOOD STOP ADJUSTMENT
Units with an Adjustable Hood Stop Installed have the capablity to adjust between a 40° to 45° degree
settings. These simple steps will assist you in accomplishing this. If you have diffi culty accomplishing this,
please call a qualifi ed service agent or Star Manufacturing Technical Service Department.
1. Remove the front bolts from the hood stop, and loosen the back bolts up, do not completely remove the back
bolts.
2. Adjust the hood stop to the desired position, the top hole is to stop the hood at 40° degrees the bottom hole is to
stop the hood at 45° degrees.
3. Re-install the front bolts and tighten up the back bolts.
Hood Stop
Front Bolt
Rear Bolt
9