Installation Electrical Connection; Clearance - Lang CSE12-208VCD Installation And Operation Instructions Manual

INSTALLATION
Electrical Connection
Verify griddle installation was performed as directed in
the installation instructions.
Connect electrical service to the box at the back of the
griddle.
Electrical specifications are located on the data plate.

Clearance

Use this griddle only in non-combustible locations.
Maintain clearances of base appliance.
THIS APPLIANCE MUST BE GROUNDED AT THE TERMINAL PROVIDED. FAILURE TO
GROUND THE APPLIANCE COULD RESULT IN ELECTROCUTION AND DEATH.
WARNING
INSTALLATION OF THE UNIT MUST BE DONE BY PERSONNEL QUALIFIED TO WORK
WITH ELECTRICITY AND PLUMBING. IMPROPER INSTALLATION CAN CAUSE INJURY
TO PERSONNEL AND/OR DAMAGE TO EQUIPMENT. UNIT MUST BE INSTALLED IN
WARNING
ACCORDANCE WIHT ALL APPLICABLE CODES.
BROILER ELEMENTS CAN IGNITE GREASE FIRES ON THE GRIDDLE SURFACE, WHICH
MAY RESULT IN PROPERTY DAMAGE, SERIOUS INJURY OR DEATH. ENSURE GRIDDLE
SURFACE IS SLOPPED DOWN FROM BACK TO FRONT BY AT LEAST 1/4" BEFORE
WARNING
COOKING.
The data plate is located behind the Clamshell® between the two pivot arms. The
NOTICE
Clamshell® voltages, wattage, serial number, wire size and clearance specifications are on
the data plate. Carefully read and understand this information before proceeding with the
installation.
The installation of any components such as a vent hood, grease extractors or fire
NOTICE
extinguisher systems must be conform to the applicable National, State and locally
recognized installation standards.
6