Technical Specifications; Barcode Test Sample - Opticon OPH-5000i Specification Manual

8 Technical Specifications

Aim the laser light at the center of a code to scan it. For long distance scanning, ambient light entering
the angle of view may affect the scanning performance. The conditions for technical specifications are
as follows, unless otherwise specified in each section.
<Conditions>
Ambient Temperature and Humidity
Ambient Light
Angles
Curvature
Power Supply Voltage
PCS (1D and 2D)
Scanning Test
Barcode Test Sample (1D and 2D)
< Test chart >
For 1D codes, OPTOELECTRONICS test samples
For GS1 Databar, stacked codes and 2D codes, printed by a dedicated printer for barcode

8.1 Barcode Test Sample

1D Barcodes
<Code 39>
Resolution
0.1 mm (3.9 mil)
0.127 mm (5 mil)
0.20 mm (7.9 mil)
0.254 mm (10 mil)
0.508 mm (20 mil)
<Code 128>
Resolution
0.20 mm (7.9 mil)
<UPC>
Resolution
0.330 mm (13 mil)
GS1 Databar/Composite
<GS1-limited>
Resolution
0.169 mm (6.7 mil)
0.169 mm (6.7 mil)
Room temperature, room humidity
100 ~200 lux (on the surface of a barcode)
Pitch: α = 0°, Skew: β = 15°, Tilt: γ = 0°
R = ∞
5.0 V
0.9 or higher
Accept the performance with 90% or more success rate
for 10 tries of scan. One reading should be 2 seconds.
Specified below.
Symbology PCS
Code 39
Symbology
Code 128
Symbology
12-digit UPC
0.9/0.2
12-digit EAN
Symbology
Limited
Limited-Composite
Size (mm)
26 × 10
11 × 10
100 × 10
0.9
32.5 × 10
43 × 25
PCS Size (mm)
0.9 52 × 10
PCS Size (mm)
31.5 × 24.5
PCS Size (mm)
0.9 12 × 1.5
0.9 12 × 3.0
OPH-5000i
1st
No. of Digits
16
4
31
7
4
No. of Digits
36
No. of Digits
12/13
No. of Digits
14
26
17