To Select [All Random].*7 - Kenwood KDC-BT530U Instruction Manual

BLUETOOTH®
BLUETOOTH — Audio
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.
Audio player via Bluetooth
1 Press B SRC repeatedly to select BT AUDIO.
• Pressing enters BT AUDIO directly.
2 Operate the audio player via Bluetooth to start playback.
To On the faceplate
Press 6 IW.
Play back/pause
Select group or folder Press 2
Reverse skip/Forward skip Press S / T.
Reverse/Fast-forward Press and hold S / T.
Repeat play Press 4
[ALL REPEAT], [FILE REPEAT], [REPEAT OFF]
Random play Press and hold 3
• Press 3
/ 1 .
repeatedly.
to select [ALL RANDOM].
to select [RANDOM OFF].
To
Select a file from a folder/list
Switch between connected
Bluetooth audio devices
* Pressing the "Play" key on the connected device itself also causes switching of sound output
from the device.
Operations and display indications may differ according to their availability
on the connected device.
Settings to use KENWOOD Remote application
KENWOOD Remote application is designed to control the KENWOOD car
receiver's operations from the following devices.
: iPhone/iPod (via Bluetooth or via USB input
terminal) or Android smartphone (via Bluetooth)
: Android smartphone (via Bluetooth)
• For , "R.APP" indicator on the display window lights up
when KENWOOD Remote application is connected.
Preparation:
• Install the latest version of KENWOOD Remote application on your device
before connecting.
• For more information, visit <www.kenwood.com/cs/ce/>.
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the table on page 18),
then press the knob.
3
Repeat step 2 until the desired item is selected or activated.
4
Press and hold to exit.
To return to the previous setting item, press
On the faceplate
Refer to "Select a file from a folder/list" on
page 9.
Press 5.*
.
ENGLISH
17