Display settings Selecting display type Selecting text display Information display setting Illumination color selection Display & Illumination setting KDC-BT51U/ KDC-5751SD/ KDC-5051U General operation Adjusting the Clock Adjusting the Date Dual clock display Clock & Date display type setting Auxiliary input display setting...
• If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • Characters that conform to ISO 8859-1 can be displayed.
KDC-5051U [iPod] button p [LOG] button q [DISP] button ] button KDC-BT51U/ KDC-5751SD/ KDC-5051U Function setting Function setting operation Preferences of this unit can be set in the Function setting mode. For detailed setting procedure and items, refer to the explanation for each source function.
iPod control operation For basic operation to playback iPod contents, refer to the Quick Start Guide. Music search Searching for the song you want to play. Enter Music search mode Press the [ ] button. “MUSICSEARCH” is displayed. Search for music Operation type Operation Movement between items Turn the Control knob.
• When the music being played has no information on browsing items or no music was found, “Not Found” is displayed. KDC-BT51U/ KDC-5751SD/ KDC-5051U Direct search Searching for music by selecting a browse item and an alphabetic character(s). Enter Search select mode Press the [ ] button for at least 1 second.
Skip search The number of songs to be skipped is determined by the ratio of the total number of songs in the list which is selected. Enter Music search mode Press the [ ] button. “MUSICSEARCH” is displayed. Enter Search select mode Press the [ ] button.
Exit Function setting mode Press the [ ] button for at least 1 second. KDC-BT51U/ KDC-5751SD/ KDC-5051U Registering a song in the playlist You can register your favorite songs to make a playlist. You can register up to ten songs in the playlist.
Playing the playlist Enter Search select mode Press the [ ] button for at least 1 second. Select Recall playlist mode Turn the Control knob to select “Recall My Playlist”, and then press the Control knob. Play a song in the playlist Turn the Control knob to select the song you want to play, and then press the Control knob.
1 second. Cancel the Music Search Press the [ ] button. mode KDC-BT51U/ KDC-5751SD/ KDC-5051U Music Editor media Skip search The number of songs to be skipped is determined by the ratio of the total number of songs in the list which is selected.
Play mode You can select a Play Mode, such as Random play and Repeat play. Select CD/ USB/ SD source Press the [SRC] button. Select the “CD”, “USB”, or “SD” display. Enter Function setting mode Press the Control knob for at least 1 second. Select the Play function mode Turn the Control knob to select “Play Mode”, and then press the Control knob.
Turn the Control knob to select “YES”, and then press the Control knob. When 18 (FM)/ 6 (AM) stations that can be received are put in the memory, auto memory entry closes. KDC-BT51U/ KDC-5751SD/ KDC-5051U Seek mode setting Selects the tuning mode of the radio. Select Tuner source Press the [SRC] button.
Tuner setting Sets the tuner items. Select Tuner source Press the [SRC] button. Select the “TUNER” display. Enter Function setting mode Press the Control knob for at least 1 second. Select the Setting mode Turn the Control knob to select “Settings”, and then press the Control knob.
This function cannot be used during a traffic bulletin or AM reception. • When the selected Program Type is not found, “No PTY” is displayed. Select another Program Type. KDC-BT51U/ KDC-5751SD/ KDC-5051U Program Type preset Putting the Program Type in the Preset button memory and quick recall. Display Presetting the Program Type “Classics”...
Changing Language for PTY Function Selecting the Program Type display language as follows; Language Display English “English” French “French” German “German” Enter PTY mode Press the [ ] button twice. Enter Changing Language mode Press the Control knob. Select the language Turn the Control knob to select language, and then press the Control knob.
Stations are logged after 2 minutes of reception. This timing can be changed. Refer to time setting> (page 22). KDC-BT51U/ KDC-5751SD/ KDC-5051U Log memory item lock Locks Log memory items to avoid them being deleted. Display the Log memory list Press the [LOG] button.
Deleting a Log memory item Deletes Log memory items. Enter Function setting mode Press the Control knob for at least 1 second. Select the Log delete mode The item can be selected and determined as follows. “Settings” > “Log” > “Log Delete”...
Set the reception time for the timing to start logging the station Turn the Control knob to select time (“10SEC”, “30SEC”, “1MIN”, “2MIN”, or “5MIN”), and then press the Control knob. Exit Function setting mode Press the [ ] button for at least 1 second. KDC-BT51U/ KDC-5751SD/ KDC-5051U...
Turn the Control knob to select Display type, and then press the Control knob. Exit Function setting mode Press the [ ] button for at least 1 second. KDC-BT51U/ KDC-5751SD/ KDC-5051U Selecting text display Changes displayed information on each of the following sources: In Tuner source Information Frequency &...
In Bluetooth Audio “BT AUDIO EXT” (Optional accessory KCA-BT200, KCA-BT300) source Information Source name Spectrum analyzer & Clock Date Title & Artist name (KCA-BT300 only) Album & Artist name (KCA-BT300 only) Blank Enter Function setting mode Press the Control knob for at least 1 second. Select Text display selection mode The item can be selected and determined as follows.
Exit the detail color adjustment mode. Exit Function setting mode Press the [ ] button for at least 1 second. KDC-BT51U/ KDC-5751SD/ KDC-5051U Display & Illumination setting Sets the display and illumination. Enter Function setting mode Press the Control knob for at least 1 second.
Page 27
“ILLUMI Dimmer” Reduces the key Illumination brightness. “Auto”: Dims the illumination in conjunction with the Light switch of the vehicle. “Manual1”: Dims the illumination constantly. “Manual2”: Dims the illumination darker than Manual1. “OFF”: Does not dim the illumination. “ILLUMI Effect” Sets whether the key illumination color is changed in conjunction with the key operation.
⁄ • For adjustment during summer time, refer to <Clock & Date display type setting> (page KDC-BT51U/ KDC-5751SD/ KDC-5051U Adjusting the Date Enter Function setting mode Press the Control knob for at least 1 second. Select the Date Adjust mode The item can be selected and determined as follows.
Dual clock display Sets time for two different cities. Enter Function setting mode Press the Control knob for at least 1 second. Select the City Select mode The item can be selected and determined as follows. “Settings” > “Clock&Date” > To select the item, turn the Control knob.
Select “AUX”, “DVD”, “PORTABLE”, “GAME”, “VIDEO”, or “TV”. Exit Function setting mode Press the [ ] button for at least 1 second. KDC-BT51U/ KDC-5751SD/ KDC-5051U Function of KDC-5751SD, KDC-5051U Muting the audio upon reception of phone call The audio system automatically mutes when a call comes in.
Selecting “YES” and then pressing Control knob starts upgrading the firmware. For how to update the firmware, access our web site. http://www.kenwood.com/cs/ce/ Set the Initial setting item Turn the Control knob to select desired value, and then press the Control knob.
Turn the Control knob to select “DEMO Mode”, and then press the Control knob. Set the Demonstration mode Turn the Control knob to select desired value (“ON” or “OFF”), and then press the Control knob. Exit Function setting mode. KDC-BT51U/ KDC-5751SD/ KDC-5051U...
Function of KDC-BT51U, KCA-BT300/BT200 (Optional Accessory) Operation of hands-free phoning Before use KDC-BT51U • If your cell-phone is not yet registered, register (pair) it by referring to <Registering cell-phone> (page 9) in the Quick Start Guide or <Registering cell-phone> (page 34) in this document.
Receiving a call Answering a phone call KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the Control knob. ⁄ • The following operations disconnect the line: - Insering a CD. - Connecting a USB device. • The name of the calling party is displayed if it has already been registered in the Phone Book.
Function of KDC-BT51U, KCA-BT300/BT200 (Optional Accessory) Operation of hands-free phoning Dialing a number Enter Bluetooth mode KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the [LOG] button for at least 1 second. “BT MODE” is displayed. Select the Number dial mode Turn the Control knob to select “Number Dial”,...
Speed dialing (Preset dial) Enter Bluetooth mode KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the [LOG] button for at least 1 second. “BT MODE” is displayed. Select the Preset dial mode Turn the Control knob to select “Preset Call”, and then press the Control knob.
Function of KDC-BT51U, KCA-BT300/BT200 (Optional Accessory) Operation of hands-free phoning During a call Disconnecting a Call Press the [SRC] button. Switching to the Private mode Push the Control knob towards right or left. Switches between Private talk (“PRIVATE”) and Hands-free talk each time this button is pressed.
Clearing the Disconnection message KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the [LOG] button for at least 1 second. “HF Disconnect” disappears. Making a voice dialing call Enter Bluetooth mode KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the [LOG] button for at least 1 second.
Function of KDC-BT51U, KCA-BT300/BT200 (Optional Accessory) Operation of hands-free phoning Displays of phone number type (category) The category items in the Phone Book are displayed as follows: Display Information General “General” / Home “Home” / Office “Office” / Mobile “Mobile” / “Other”...
<Registering Bluetooth device> (page • You need to select the Bluetooth audio player you wish to connect. Refer to <Selecting the Bluetooth device you wish to connect> (page KDC-BT51U/ KDC-5751SD/ KDC-5051U Basic operation Selecting Bluetooth audio source Press the [SRC] button. 44).
Function of KDC-BT51U, KCA-BT300/BT200 (Optional Accessory) Bluetooth setup Registering Bluetooth device To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to five Bluetooth devices to this unit. When registering from Bluetooth devices Turn on the this unit.
Registering Special bluetooth device Allow registration of a special device that cannot be registered normally (pairing). Enter Bluetooth mode KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the [LOG] button for at least 1 second. “BT MODE” is displayed.
Function of KDC-BT51U, KCA-BT300/BT200 (Optional Accessory) Bluetooth setup Downloading the Phone book Download the phone book data from the cell- phone to this unit so that you can use the Phone Book of this unit. Downloading automatically If the cell-phone supports a phone book...
Deleting a registered Bluetooth device You can delete a registered Bluetooth device. Enter Bluetooth mode KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the [LOG] button for at least 1 second. “BT MODE” is displayed. Enter Function setting mode Press the Control knob for at least 1 second.
Function of KDC-BT51U, KCA-BT300/BT200 (Optional Accessory) Bluetooth setup Adding a voice dialing command Add a voice tag to the phonebook for voice dialing. You can register up to 35 voice tags. Enter Bluetooth mode KDC-BT51U Press the [ ] button.
Setting a voice command for category Add a voice tag to the phone number category (type) for voice calling. Enter Bluetooth mode KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the [LOG] button for at least 1 second. “BT MODE” is displayed.
Function of KDC-BT51U, KCA-BT300/BT200 (Optional Accessory) Bluetooth setup Bluetooth detail setting Configures initial settings of this unit. Enter Bluetooth mode KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the [LOG] button for at least 1 second. “BT MODE” is displayed.
Function of KDC-BT51U, KCA-BT300/BT200 (Optional Accessory) SMS (Short Message Service) Displaying the SMS The SMS received by at the cell-phone is displayed on the receiver. A newly received message is displayed. ¤ • To prevent car accidents, the driver should not read the SMS while driving.
In this case, “RESUMING” is displayed without displaying a folder name, etc. Changing the browse item will display a correct title, etc. • You cannot operate iPod if “KENWOOD” or “✓” displayed on iPod. for further details.
Page 53
About “KENWOOD Music Editor” • This unit supports the PC application “KENWOOD Music Editor Light ver1.1” or later. • When you use the audio file with database information added by the “KENWOOD Music Editor Light ver1.1”, you can search a file by title, album or artist name using the <Music search>...
Clean the media, referring to the CD cleaning of the section on <Handling discs> (page The recording condition is bad. Record the media again or use another media. KDC-BT51U/ KDC-5751SD/ KDC-5051U The messages shown below display your systems condition. TOC Error: is not set to...
Page 55
No Music Data/Error 15: • The connected USB device contains no playable audio file. • Media was played that does not have data recorded that the unit can play. USB ERROR: Some trouble may have occurred to the connected USB device. ...
MP3 decode : Compliant with MPEG-1/2 Audio Layer-3 WMA decode : Compliant with Windows Media Audio AAC decode : AAC-LC “.m4a” files KDC-BT51U/ KDC-5751SD/ KDC-5051U USB Interface USB Standard : USB1.1/ 2.0 (Full speed) File System : FAT16/ 32 Maximum Supply current...
: 1200 mV Input Impedance : 10 kΩ General Operating voltage KDC-BT51U : 14.4 V (10.5 – 16V allowable) KDC-5751SD/ KDC-5051U : 14.4 V (11 – 16V allowable) Maximum Current consumption : 10 A Installation Size (W x H x D)
Page 58
• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners. •...
Page 59
1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Slovensko • S tem Kenwood izjavlja, da je ta KDC-BT51U v skladu z osnovnimi zahtevami in ostalimi ustreznimi predpisi Direktive 1999/5/EC. Slovensky • Spoločnosť Kenwood týmto vyhlasuje, že KDC-BT51U spĺňa zákldné požiadavky a ďalšie prislušné...