Kenwood KDC-BT52U Instruction Manual

KDC-BT52U
CD-RECEIVER
INSTRUCTION MANUAL
Before reading this manual, click the button below to check the latest edition and the
modified pages.
Check the latest edition
© 2011 JVC KENWOOD Corporation

How to read this manual

Function setting procedure
For the procedure for selecting a setting item in the
Function setting mode, see the following example:
Example: Adjusting the contrast of the display
1
Enter the Function setting mode
Press and hold the Control knob.
"Function" is displayed.
2
Select the Contrast function item
Play Mode
Settings
Initial Settings
Turn the Control knob to select "Settings", and
then press the Control knob.
Next, turn the Control knob to select
"DISP&ILLUMI", and then press the Control
knob.
Finally, turn the Control knob to select
"Contrast", and then press the Control knob.
In this manual, the above operational
procedure is described as follows:
2
Select the Contrast function item
Select the following items using the
Control knob.
"Settings"
Press the [
item.
⁄
• Clicking Refer
procedure displays this page, allowing you to confirm how
to use the Control knob.
3
Set the Contrast function
Turn the Control knob to select a value (1 - 30),
and then press the Control knob.
The previous item is displayed.
4
Exit the Function setting mode
Press and hold the [
IM344_Ref_E_en_02
About the notation "
Clicking "Contents" shown at the upper left of each
page allows you to jump to the contents page.
Clock&Date
DISP&ILLUMI
Display Dimmer
Contrast
Tuner Settings
DISP NEGA/POSI
Refer
> "DISP&ILLUMI" > "Contrast"
] button to return to the previous
near the description of an operational
] button.
Contents
"