Intended Use - Black + Decker YARDMASTER BCASHT80 Instruction Manual

20v max hedge trimmer
Table of Contents

Advertisement

Available languages

Available languages

English
2. For long storage, it is recommended to store a fully
charged battery pack in a cool dry place out of the
charger for optimal results.
nOTE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be
recharged before use.
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
COMPONENTS (FIG. A)

WARNING:
tool or any part of it. Damage or personal injury
could result.
Refer to Figure A at the beginning of this manual for a
complete list of components.

Intended Use

Your BLACK+DECKER hedge trimmer is designed for
residential trimming applications.
DO nOT use under wet conditions or in presence of
flammable liquids or gases.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Installing and Removing Attachments
(Fig. B, C)

WARNING:
circumstances should this product be used near water.

WARNING:
within the base unit become hot during use. Avoid
contact with moving parts within base unit when
removing and installing accessories or attachments.

WARNING:
battery from the base unit. Remove any accessory from the
attachment before removing or installing the attachment.

WARNING:
not place fingers or other objects inside the base unit,
other than the attachments designed to work with the
base unit.
1. To fit an attachment or the extension pole to the base
unit
1
, align the attachment/pole base with the base
unit as shown in Fig. B and Fig. C.
2. Firmly push the attachment or extension pole onto the base
unit until it snaps into place and an audible click is heard.
nOTE: Attachments fit onto the extension pole in the same
manner as the base unit.
3. Ensure attachment or extension pole is securely attached
to the base unit or extension pole by gently pulling it
away. The attachment should remain in place.
8
Never modify the power
Shock hazard. Under no
Burn hazard. Moving parts
Before assembly, remove the
To reduce the risk of injury, do
4. To remove an attachment or extension pole, depress
the release button
8
attachment or extension pole and pull attachment
or extension pole away from the base unit or
extension pole.
nOTE: Only use attachments that are specifically designed
for and are compatible with the base unit.
Fig. B
9
Fig. C
6
Proper Hand Position (Fig. D, E)

WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.

WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
sudden reaction.
Base mode, proper hand position requires
on the bail handle
, with the right hand on the main
 3 
handle 
.
 2 
Pole mode, operate with the right hand on the main
handle
2
and the left hand on the pole handle
Fig. D
or
10
located on the side of the
10
8
the left hand
 7 
.
3
1
1
2

Advertisement

Table of Contents
loading

Table of Contents