Installing And Removing The Battery Pack; Base Mode; Operation - Black + Decker YARDMASTER BCASHT80 Instruction Manual

Fig. E
7

Installing and Removing the Battery Pack

(Fig. F)

WARNING:
switch is engaged to prevent switch actuation before
removing or installing battery.
nOTE: For best results, make sure your battery pack is
fully charged.
To install battery pack: Insert battery pack
housing as shown in Fig. F until fully seated and an
14
audible click is heard.
Make sure battery pack is fully seated and fully latched
into position.
To remove battery pack: Depress the battery release
button on the battery and pull battery pack out
15
of appliance.
Fig. F
13

OPERATION


WARNING:
serious personal injury, turn unit off and remove
the battery pack before making any adjustments
or removing/installing attachments or
accessories. An accidental start-up can cause injury.
2
Make certain the lock-off
into battery
13
15
14
To reduce the risk of

WARNING:
circumstances should this product be used near water.

WARNING:
within the base unit become hot during use. Avoid
contact with moving parts within base unit when
removing and installing accessories.

WARNING:
protection that conforms to ANSI Z87.1 (CAN/
CSA Z94.3) while operating this appliance.

CAUTION:
operation is dusty. Use of gloves, long pants and
substantial footwear is recommended. Keep long
hair and loose clothing away from openings and
moving parts.
Switching On (Fig. G, H)
Always be sure of your footing and grip the tool firmly
with both hands with the thumb and fingers encircling
both handles.

Base mode

1. Push the lock off switch
handle , and then the ON/OFFswitch
3
unit is running, you may release the lock off switch. The
more the ON/OFF switch
speed of the base unit.
2. In order to keep the unit running you must continue to
squeeze bail handle and the ON/OFF switch
the unit off, release either the bail handle or the ON/OFF
switch 4 .
Pole mode
1. Push the lock off switch
OFF switch . Once the unit is running, you may release
4
the lock off switch. The more the ON/OFF switch
depressed, the higher the speed of the base unit.
2. In order to keep the unit running you must continue
to squeeze the ON/OFF switch
release the ON/OFF switch
Fig. G
Shock hazard. Under no
Burn hazard. Moving parts
Always use proper eye
Wear a filter mask if the
down, squeeze the bail
5
. Once the
4
is depressed, the higher the
4
4
down and squeeze the ON/
5
4 . To turn the unit off,
4 .
5
3
English
. To turn
is
4
4
9