16.
Operating elements
16.6 CNC milling machines CC-F1200 hs – CC-F1210 hs with 2.0 kW motor
16.6.1 Switch cover on CNC operating console
1.
Emergency off switch
2.
Mode selection switch (CNC operation) (Idle position) (Set-up mode)
3.
Potentiometer rotating knob for speed selection of the electrical drive motor
4.
3-setting switch of the electrical drive motor (I=START RIGHT 0=STOP II=START LEFT)
5.
Coolant ON/OFF (if coolant pump is connected)
6.
Diodes to display the status of the controller
7.
Reset switch for controller
64