Operating Elements; Milling Machines F1200 - F1210 With 1.4 Kw Motor - WABECO F1200 Operating Instructions Manual
Cnc milling machines with dovetail guides
Hide thumbs
Also See for F1200:
- Operating instructions manual (98 pages) ,
- Operating instructions manual (160 pages)
Table of Contents
Advertisement
16.
Operating elements
16.1 Milling machines F1200 - F1210 with 1.4 kW motor
1.
Potentiometer rotating knob for speed selection of the electrical drive motor
2.
Emergency off switch
3.
ON/OFF switch with under-voltage trigger
4.
Clamping lever for securing the tool spindle
5.
Clamping lever for securing the longitudinal motion (x-axis) at the cross slide support
6.
Hand wheel for adjusting the transverse motion (y-axis) of the cross slide support
7.
Clamping lever for securing the transverse motion (y-axis) at the cross slide support
8.
Hand wheel for adjusting the longitudinal motion (x-axis) of the cross slide support
9.
Clamping lever for securing the boring and milling depth
10.
Activation lever for moving the tool spindle (sleeve stroke)
11.
Hand wheel for setting the boring and milling depth
12.
Clamping lever for securing the protective hood
13.
Index bolt for securing the milling head
14.
Depth stop for boring
15.
Hexagonal nut for swivelling the milling head
16.
Tool tightening screw
57
Advertisement
Table of Contents
