Milling Machines F1200-C Hs - F1210-C Hs With 2.0 Kw Motor - WABECO F1200 Operating Instructions Manual
Cnc milling machines with dovetail guides
Hide thumbs
Also See for F1200:
- Operating instructions manual (98 pages) ,
- Operating instructions manual (160 pages)
Table of Contents
Advertisement
16.
Operating elements
16.4 Milling machines F1200-C hs – F1210-C hs with 2.0 kW motor
1.
Potentiometer rotating knob for speed selection of the electrical drive motor
2.
3-setting switch of the electrical drive motor (START RIGHT - STOP - START LEFT)
3.
Emergency off switch
4
Tool tightening screw
5.
Hand wheel for setting the boring and milling depth
6.
Clamping lever for securing the boring and milling depth
7.
Hand wheel for adjusting the longitudinal motion (x-axis) of the cross slide support
8.
Clamping lever for securing the transverse motion (y-axis) at the cross slide support
9.
Hand wheel for adjusting the transverse motion (y-axis) of the cross slide support
10.
Clamping lever for securing the protective hood
11.
Clamping lever for securing the tool spindle
12.
Activation lever for moving the tool spindle (sleeve stroke)
13.
Clamping lever for securing the longitudinal motion (x-axis) at the cross slide support
14.
Hexagonal nut for swivelling the milling head
15.
Index bolt for securing the milling head
60
Advertisement
Table of Contents
