Configure The Network Settings - Panasonic WV-X8570N Important Information Manual

Configure the network settings

Configuring the camera so that it can be accessed from a PC
Configure the setting of the camera after temporarily invalidating the firewall software. Once the
camera configuration is completed, return to the original state.
Contact the network administrator or your Internet service provider for information about
configuring the settings of the network.
【１】
Insert the provided CD-ROM into the CD-ROM drive of your PC.
The License Agreement will be displayed. Read the Agreement and choose "I accept the term
in the license agreement", and click [OK].
⇒ The launcher window will be displayed.
Note:
⿟ If the launcher window is not
displayed, double click the
"CDLauncher.exe" file on the
CD-ROM.
⿟ Refer to "Using the CD-ROM" in
the Operating Instructions on the
Panasonic support web site for
further information about
CDLauncher
【2】
Click the [Run] button next to [IP Setting Software].
⇒ [Panasonic IP Setting] screen will be displayed.
The MAC Address / IP address of the detected camera will be displayed.
【3】
Select the camera you want to configure (A), and click [Network Settings] (B) to
change the network settings. Then, click [Access Camera] (C).
Note:
Select the camera with same MAC address as the MAC address printed on the camera that you
want to configure.
B
C
24
A