E
SD ERROR indicator
When the set is being started
When an SD memory card is recognized normally
When the SD card slot is not used or an abnormality is
detected in SD card after the camera has started
F
SD MOUNT indicator
When an SD memory card is inserted and could
be recognized
When data can be saved after the SD memory card is
inserted and the SD ON/OFF button is pressed
(less than 1 second)
When data can be saved to the SD memory card
When the SD memory card is removed after holding down
the SD ON/OFF button (about 2 seconds)
When data cannot be saved to the SD memory card
because an abnormality was detected or the SD
memory card is configured not to be used
Note:
Lighting/blinking LED can be turned off with the software settings at any time. (The initial state is
lighting or blinking.) Set the LED to be solid off if necessary, depending on the installation condi-
tions. (☞ Operating instructions on the Panasonic support web site)
Lights red
Lights red → Lights off
Lights red → Stays red
Lights off → Blinks green →
Lights off
Lights off → Lights green
Lights green
Lights green → Blinks green →
Lights off (recording)
Lights green → Lights off
(waiting for recording)
Lights off
21