iCharger 1010B User Manual page 8

iCharger Synchronous Balance Charger/Discharger
NiMH/ NiMH/NiCd NiCd Check Check
NiMH/ NiMH/ NiCd NiCd Check Check
Delay Delay Delay Delay 0min 0min 0min 0min
-
Dec
Dec Inc
Temp. Cut- - - - Off Temp. Cut Off
Temp. Cut Temp. Cut Off Off
ON ON ON ON 50 50℃ ℃ ℃ ℃ 50 50
-
- +
Dec
Dec Inc
Dec
Inc
Safety timer Safety timer Safety timer Safety timer
ON ON ON ON 120min 120min 120min 120min
-
- +
Dec
Dec Inc
Dec Inc
Capacity Cut- - - - Off Capacity Cut Capacity Cut Capacity Cut
ON ON 5000mAh 5000mAh
ON ON 5000mAh 5000mAh
- + -
Dec Inc Dec
Dec Inc
Input power low Input power low
Input power low Input power low
Cut- - - - Off Cut Cut Cut Off Off Off 10.00V 10.00V 10.00V 10.00V
-
Dec
Dec Inc
Wat Watt t t t Limit (W) Wat Wat Limit (W) Limit (W) Limit (W)
CHG CHG:AUTO :AUTO DCHG:20 DCHG:20
CHG CHG :AUTO :AUTO DCHG:20 DCHG:20
-
- +
Dec
Dec Inc
Dec Inc
Key Beep Key Beep
Key Beep Key Beep
Buzzer Buzzer Buzzer Buzzer
Dec
Dec Inc
Completion Ring Completion Ring
Completion Ring Completion Ring
Beep always Beep always
Beep always Beep always
-
Dec Inc
Dec
Back Back- - - - light Back Back light light light
Cooling fan AUTO Cooling fan AUTO
Cooling fan AUTO Cooling fan AUTO
-
Dec
When NiMH&NiCd batteries are deeply discharged or left unused for a long
time, they will produce a false -
disable - △ V testing to avoid this problem.
Range: 0 – 30min (0, default)
+
Inc
Battery upper temperature limit. The battery temperature can be monitored
with the attached temperature sensor. In order to protect the battery from
damage due to high temperatures the iCharger will stop charging or
discharging immediately if the temperature exceeds the cut-off setting.
+
Users can choose
Inc
Range: 20 – 80
Charging time upper limit. The charging process will stop immediately if it
exceeds the set value.
Range: 1 – 999min
+
Inc
Capacity protection. The charging/discharging process will stop immediately
Off Off Off
if the calculated charge input/drained exceeds the set value.
Range: 100 – 99900mAh
+
Inc
Input voltage protection lower limit. The charging/discharging process will
stop immediately if the input voltage falls below the set value.
Range: 10.00 – 15.00V (10.00V, default)
+
Inc
Charge/Discharge power limit. The maximum charge/discharge power of
iCharger can be adjusted in order to limit internal temperature and to
protect the input current from
the iCharger can adjust the output charging power according to the input
+
capability.
Inc
CHG: 50 – 200W (180W for 106B
DCHG: 5 – 30W (20W for 106B
Key confirmation and alert tone. If the keyboard sound is ON there will be a
ON ON ON ON beep when you press any key. If the buzzer is ON the iCharger will
generate an alert tone for certain events.
ON ON ON ON
Key Beep: OFF&ON: (ON, default)
- +
Buzzer: OFF&ON: (ON, default)
Inc
Process completion tone. Controls the tones generated at end of charging
or discharging and the cyclic charging/discharging indication.
Options: Beep 5 times, Beep 3 minutes, Beep always (continuous until
user presses STOP), Beep OFF
+
(Beep always, default)
Inc
Back-light and cooling fan control. Adjust the LCD backlight brightness.
There are three cooling fan modes: ON, OFF, AUTO. In AUTO-Mode,
5 5 5 5 0% 0% 0% 0%
iCharger adjusts the fan automatically to control its internal temperature.
Cooling fan: OFF, ON & AUTO: (AUTO, default)
+
Inc
△ V which stops charging early. You can
o
℃ or F as the temperature unit
o o
℃ ℃ ℃ ℃ ( 68 – 176 F). F = (9/5)×
over-loading. When the limit is set to AUTO
a nd AUTO.
） ） ） ）
） ） ） ）
-8-
1010B/106B
℃ ℃ ℃ ℃ + 32.