Related Manuals for Martec MR0124
Summary of Contents for Martec MR0124
- Page 1 ROCKET SERIES Ceiling Fan Instruction Book Models: MR0124 MRO1244 DESCRIPTION QUANTITY Motor assembly Instruction manual Screw kit Balancing kit Hanging bracket Wall control kit...
- Page 2 ONLY install the remote controller kit that comes supplied by Martec Pty Ltd within package. DO NOT control operation of fan and light with any other remote control than what was approved by Martec Pty Ltd and supplied within this package, as this will void warranty.
- Page 3 Hanging Bracket Wall Control Hanging Ball Canopy Down Rod Cover Housing With Light Light Plate Glass Blade Wall Control Hanging Bracket Hanging Ball Canopy Down Rod Reverse Switch Cover Without Light Motor Housing Blade www.martecaustralia.com.au | 02 8778 7500 | sales@martecltd.com.au Page 3...
-
Page 4: How To Assemble
Secure the hanger bracket to ceiling beam or a suitable piece of timber inserted between the ceiling beams. Martec Pty Ltd recommends the bracket to be attached with two long screws as supplied within the package. There is a ball seat rubber cover need to be pressed into the bracket.(See Fig.1.) Place circular shockproof gasket above the hanger bracket. - Page 5 USE IN ALL SEASONS Always ensure fan is set to ‘OFF’ and blades are still, prior to changing direction of blades. Reverse switch on fan should ideally be set on ‘FORWARD’ (down position) during warmer season to move blades in a clockwise direction & ‘REVERSE’ (up position) during cooler seasons to make the fan rotate in an anticlockwise direction (See Fig.5) Fig.5 HOW TO REMOVE THE SHADE (Version with Light)
-
Page 6: Wiring Instructions
WIRING INSTRUCTIONS www.martecaustralia.com.au | 02 8778 7500 | sales@martecltd.com.au Page 6...