English Safety Notes Symbol description Gloves should be worn during installation to prevent Adjustment (see page 7) crushing and cutting injuries. To adjust the hot water limiter. The product may only be used for bathing, hygienic and body cleaning purposes. Installation Instructions Dimensions (see page 8) • Prior to installation, inspect the product for transport Flow diagram damages. After it has been installed, no transport or surface damage will be honoured. (see page 9) • The plumbing codes applicable in the respective Operation (see page 10) countries must be oberserved. Hansgrohe recommends not to use • The drain valve must only be used as intended. It is not as drinking water the first half liter of allowed to attach other objects to the drain valve, for water drawn in the morning or after a example a semi-pedestal. prolonged period of non-use. • If you wish to increase the water flow, the EcoSmart ® After periods of prolonged non-use, but (flow limiter) located behind the aerator can be at least every third day, the fittings must removed. be opened with the handle in hot and Pressure and tightness test cold position to prevent stagnation in the connecting lines. Let the water run until...
Page 3
Svenska Säkerhetsanvisningar Symbolförklaring Handskar ska bäras under monteringsarbete för att (se Inställning av maxtemperatur undvika kläm- och skärskador. sidan 7) Produkten får bara användas till kroppshygien med Ställa in varmvattenregleringen. bad och dusch. Monteringsanvisningar Måtten (se sidan 8) • Det måste undersökas om produkten har transportska- Flödesschema dor innan den monteras. Efter monteringen accepteras inga transport- eller ytskiktskador. (se sidan 9) • De installationsriktlinjer som gäller i länderna ska Hantering (se sidan 10) följas. Hansgrohe rekommenderar att den • Bottenventilen får bara användas till det som den första halvlitern inte används som dricks- är avsedd för. Det är inte tillåtet att montera andra vatten på morgonen eller efter längre föremål, t.ex. en kåpa, vid bottenventilen. perioder utan användning. • Om större vattenflöde önskas kan EcoSmart (flödes- ® För att undvika en stagnering i anslut- kontroll) som sitter bakom perlatorn tas bort. ningsledningarna måste blandaren Tryck och täthetsprov öppnas och spolas kallt och varmt tills en jämn temperatur är uppnådd när den • Blandarens anslutningar skall täthetkontrolleras efter...
Need help?
Do you have a question about the Focus 100 and is the answer not in the manual?
Questions and answers