Assembly Rigid Holder; Image 5: Forearm With One Part Of The Holder; Image 6: Forearm With Both Parts Of The Holder; Image 7: Forearm With C-Guide - FAUDE C-Guide Assembly Instruction Manual

3.1

ASSEMBLY RIGID HOLDER

Image 5: Forearm with one part of the holder

When this is done, the
second side of the holder is
put on. Afterwards
three Hexagon head screws
M4x20 (size 3) have to be
tightened. Please ensure
that all screws
tightened evenly.

Image 7: Forearm with C-Guide

the
are

Image 6: Forearm with both parts of the holder

7
After opening the three
M4x20 screws
holder can be pulled apart.
The comb for the cable
clamping as well as the tube
holder remain on one side
of the C- Guide holder each.
Then one side of the holder
is placed on the forearm.
At the last step of the
assembly of the rigid C-
Guide holder, the media
hose will be clipped into the
holder.
the rigid