Advertisement
3.1
ASSEMBLY RIGID HOLDER
Image 5: Forearm with one part of the holder
When this is done, the second
side of the holder is put on.
Afterwards the three Hexagon
head screws M4x20 (size 3) have
to be tightened. Please ensure
that all screws are tightened
evenly
At the last step of the assembly of the rigid C-Guide holder, the media hose
will be clipped into the holder. The mounting of the rigid holder is identical to
the working steps.
After
M4x20
holder can be pulled apart.
The comb for the cable
clamping as well as the tube
holder remain on one side of
the C- Guide holder each.
Then one side of the holder
is placed on the forearm.
Image 6: Forearm with both parts of the holder
7
opening
the
three
screws
the
rigid
Advertisement
