United Vision Solutions Eagle Vision EV3000-D User Manual page 25

EV3000-D manual
Command
43 AGC Command
auto/on/
off
EV3000-D
Response
Description
44 Set Command
shutter
speed
EV3000-D
Response
Description
45 Adjust Command
white
balance(
EV3000-D
R-B)
Response
Description
46 Adjust Command
white
balance(
EV3000-D
M-G)
Response
Description
47 Adjust Command
gain
EV3000-D
Response
Description
48 Adjust Command
auto iris
level
EV3000-D
Response
Description
Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law
is prohibited. ©2008 United Vision solutions, Co., Specifications are subject to change. Check website:
Byte1 Byte2
FFh Receiver
ID
Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of
Byte3 to Select Camera 2.) Byte 6 = 1 (It will set to continuous auto
adjust),Byte6=2 (It will set to manual adjust)
FFh Receiver
ID
Receiver ID=00h~FEh,Camera 2 is Thermal Camera (Clear Bit 6 of
Byte3 to Select Camera 2.) Select sensitivity in Byte 6.[0 – low,1 –
medium,2 - high]
FFh Receiver 00~01h
ID
Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of
Byte3 to Select Camera 2.) NUC using the internal shutter.
FFh Receiver 00~01h
ID
Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of
Byte3 to Select Camera 2.) NUC using an external surface.
FFh Receiver 00~01h
ID
Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of
Byte3 to Select Camera 2.) Set absolute gain.
FFh Receiver 00~01h
ID
Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of
Byte3 to Select Camera 2.) Set absolute level.
www.unitedvisionsolutions.com
Byte3 Byte4 Byte5
00h 00h
2Fh
00h 37h 00h
00h
3Bh
00h
3Dh
00h
3Fh
00h
41h
Byte6 Byte7
Checksum
00~02h
00~02h Checksum
00h Checksum
00h Checksum
00h Checksum
00h Checksum