Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
United Vision Solutions
Installation/ Operation
Manual
EV3000D
ULTRA HEAVY DUTY PAN TILT DRIVERS
-
10 Center St. , Chicopee, MA 01013, USA
Email:
sales@unitedvisionsolutions.com
Sales Dept.
413-592-8477
Copyright © 2014 United Vision Solutions. All rights reserved.
Email:
info@unitedvisionsolutions.com
Product specifications are subject to change without notice.
Advertisement
Table of Contents
Related Manuals for United Vision Solutions EV3000D
Summary of Contents for United Vision Solutions EV3000D
- Page 1 Manual EV3000D ULTRA HEAVY DUTY PAN TILT DRIVERS 10 Center St. , Chicopee, MA 01013, USA Email: sales@unitedvisionsolutions.com Sales Dept. 413-592-8477 Copyright © 2014 United Vision Solutions. All rights reserved. Email: info@unitedvisionsolutions.com Product specifications are subject to change without notice.
-
Page 2: Graphic Symbol Explanation
UNITED VISION’s instructions, and a mounting accessory recommended by UNITED VISION should be used. 8. Power Sources - This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your installation site, consult your UNITED VISION dealer or local power company. - Page 3 Model EV3000D PAN/TILT drive is a weatherproof, ultra-heavy duty unit capable of operating with loads up to 220 pounds (100kg) and installing at harsh environment. The ultra-heavy duty 200W BLDC motors are constructed with hardened drift free gears that never require lubrication.
-
Page 4: Unpacking And Inspection
Figure 1. Mounting Hole Dimensions The EV3000D will operate safely with loads up to 220 pounds (99.80 kg) . To perform properly, the unit must be securely fastened to a suitable surface and the camera or housing must be properly mounted and balanced on the unit. -
Page 5: Terminal Assignment
MOUNTING THE HOUSING ON TILT TABLE 1. Center (balance) the camera/lens, or enclosure/camera/lens load on the tilt table. Adjust the positioning as needed to align the mounting holes. 2. Make all necessary electrical connections. Be sure to leave an adequate loop of cables between the enclosure and the pan/tilt, and the enclosure and the rigid mount to prevent binding and/or strain on the cables. - Page 6 Camera housing 12~23 Pins 1. ZOOM HOUSING 2. FOCUS 3. LENS COMMON 4. GROUND 5. CAMERA POWER (+) 1~11 Pins 6. AC POWER(HOT) 7. AC POWER(NEUTRAL) 8. LENS SUPPLY(+) 9. ZOOM POSITION 10. FOCUS POSITION 11. LENS RETURN(-) 12. DC24V(+) 13.
-
Page 7: Amp Connector
Camera housing 1. ZOOM 2. FOCUS 3. LENS COMMON 4. GROUND 5. CAMERA POWER 12VDC (+) 6. AC POWER(HOT) 7. AC POWER(NEUTRAL) 8. LENS SUPPLY(+) 9. ZOOM POSITION 10. FOCUS POSITION 11. LENS RETURN(-) 12. DC24V(+) 13. DC24V(-) 14. RS-485(+) 15. -
Page 8: Dip Switch Setting
To pan or tilt camera, move the joystick up, down, left or right. The joystick control, when deflected diagonally, will also drive the pan-and-tilt functions simultaneously. To set the EV3000D for preset operation and group touring operation. See appendix 1. DIP SWITCH SETTING Figure 4. - Page 9 The pan-and-tilt drive is factory lubricated for the life of the unit and no maintenance is required under normal operating conditions. The EV3000D pan and tilt motors are protected by limit switch for avoiding damages. Inspect the pan/tilt unit every six months to ensure trouble free operation and an extended product life. Harsh environments and/or continuous motion applications may require more frequent maintenance.